More Products

Granule Flux

AdTech is dedicated to research and development, production and marketing of granular flux for aluminum alloy casting process. It solves the problem of excessive burning loss and waste gas pollution caused by the chemical reaction of traditional flux in alloy liquid. AdTech refining flux utilizes unique technology to enhance the traditional degassing and deslagging effect, and this technology is applied to the casting process of multi-series aluminum alloy products such as micron-sized aluminum foil, PS baseboard for printing, canning material, elastic packaging material, railway transportation, aerospace products, cable & wire and other casting aluminum purifying, especially for pure aluminum and high magnesium alloys purifying.

Product Description

Specifications:
Item Type Diameter Application Amount of metal liquid per ton
Granular  flux PM02 1-3mm3-5mm Sodium-free, it is used for refining and cleaning inside furnace for 1-8 series Aluminum casting and Aluminum alloy solution 0.5-1.0kg
Granular  flux PM06 1-3mm3-5mm Removal of alkali metal(Na, Ca, Li), itis used for refining and cleaning inside furnace for precision casting of aluminum alloy. 0.5-1.0kg
Advantages:

.Replace furnace chlorine and online refining.

.Smokeless refining, zero emissions of fluoride, fully meet the emission standards set for environmental air pollution.

.Low melting point, lower than 450°C, easy dispersal.

.Low dosage, it could control the chemical reactions of burning.

.Effectively remove the alkali metals (Na, Ca, Li) and non-metallic inclusions.

.Reduce the edge crack during high magnesium alloy rolling.

Instruction:

AdTech’s Granular flux is a kind of white with slightly gray fine particles. The Main ingredients are chloride with other compounds. It turns to uniform size after heat treatment and screening. Under the action of nitrogen or argon as the carrier gas, refining flux injected into the melt for two times through powder spraying tank. Make sure the nozzle outlets as close to bottom layer of molten metal as possible, move the nozzle back and forth to ensure flux fully contact with molten aluminum. Then refine the molten metal with N2 or Ar gas in turns at the bottom layer for 20 minutes. After physical-chemical processing in molten aluminum, numerous small bubbles with oxidized slag are separated and formed The bubbles carrying hydrogen atoms slowly rise up and float out, so as to achieve the degassing and deslagging purpose of purification.

The Granular flux’s dosage in 5082 alloy melt is 1.0kg/ton, and the alkali metal removal rate is 40%-70%. Using effect date as chart:

Packing Specifications:
Item Internal Packaging Carton Packaging Pallet Packaging Special Packaging Storage& Guarantee
Index 5kg/bag 20kg/carton 1.2T/pallet As per requirement Stored in ventilated and dry environment 12 months

Attached to use running video

AdTech is dedicated to research and development, production and marketing of granular flux for aluminum alloy casting process. It solves the problem of excessive burning loss and waste gas pollution caused by the chemical reaction of traditional flux in alloy liquid.

Related products

contact us

Please send us your questions or inquiries via the form below and we will get back to you within 24 hours.

Home Tel Mail Inquiry